|
I.Technical parameters
|
Size of cut cotton is (direct * width)
|
Φ1600xH2300mm
|
|
Maximum cutting sponge density
|
200kg/㎥
|
|
Cutting thickness
|
1-30mm
|
|
Cutting speed
|
0-110m/min
|
|
Knife thickness
|
200mm
|
|
Knife width
|
180mm
|
|
After the clip blade
|
2mm Luomo steel 40#
|
|
Knife belt width
|
40mm
|
II.Main configuration
（1）Equipped with Japanese ball screw, Japanese NSK bearing, swallowtail material special steel, knife belt wheel 4 cm wide.
（2）Drive shaft 1.5kw Siemens servo motor
（3）Driving wheel 4kw Siemens motor
（4）Cutting control cabinet touch screen, omron PLC, Taiwan taida converter, schneider electric components
(5) Smooth material collection on both sides of sponge.
(6)The equipment has a counting device, which can detect the material of cutting sponge
（7）Cutting thickness and quality requirements: the thickness of the cut cotton is even, the thickness tolerance is within 0.01mm, the surface of the cut cotton is smooth, and there is no visible knife mark at any distance.(the thickness and quality of cut cotton are not affected by cutting speed and cutting thickness)
（8）Accessories: two knives with four grinding wheels
|
